Polarstar F2 Nozzle, KA FAL, TM MP5K, A&K M240 #6

F2-NZ-6

Polarstar F2 Nozzle, KA FAL, TM MP5K, A&K M240 #6

Estado: NUEVO Entrega 24/48 h
Peso: 100 gramos

For cylinder conversion systems Polarstar Airsoft assigns numbers to the nozzles instead of using the rifle model. This is because the nozzle length can vary between the same gun model when made by different manufacturers. This can be from the manufacturer designing the rifle differently, or from the thickness of the gearbox shell affecting how far from the hop-up chamber the cylinder sits. Therefore one nozzle length may work in different rifle models but not necessarily work in the same model from a different manufacture. For example, a standard MP5 could require any of 4 different nozzle lengths depending on the manufacturer.

For this reason Polarstar Airsoft produces numerous different nozzle lengths to provide compatibility for a wide range of replicas. Below we are listing the make and model of the replicas which the nozzle length is most commonly used with but it may be compatible with more models. 

Once you determine what number nozzle your replica requires, that number is universal across all engines that use the numbered nozzle system (excluding some model specific Kythera systems). So, if you determine your replica takes a #11 nozzle, then you will need to install the #11 nozzle for whichever system you are converting your replica with.
 

If your gun is not listed in the compatibility database down here, a recommended nozzle length may calculated by measuring your original gearbox and nozzle. Using a set of calipers and following the diagram below, measure these specific areas of the gearbox and input them into the following formula. Please note that measurements need to be in thousands of an inch (0.001").

A more precise measurement (which accounts for the hopup and bucking in use) may be obtained by installing a nozzle into the system which is slightly too long for the replica and measuring the nozzle setback when placed into the hopup.


The measured tip length should be within +/- 0.010" of an exiting nozzle to be compatible. If the tip length you measure does not match up to a production nozzle within +/- 0.010" then a nozzle is not currently made for that rifle. However, please contact us with your measurements as custom nozzles can be special ordered.

 

Num Most Commonly Used With Tip

1

TM M4/M16, A&K PKM, TM MP5 A/SD, ICS MP5 A/SD, G&G KAC SR-25E2

1.205

2

CYMA AK, CYMA MP5 A/SD, G&G UMP

1.242

3

CA M249/MK46, A&K M249/MK46

1.19

4

G&G GR-25

1.8305

5

A&K SR-25, JG SR-25, ICS SIG 550/551/552

1.3435

6

KA FAL, TM MP5K, A&K M240

1.2745

7

PTS MASADA, CA SCAR-L

1.514

8

VFC SCAR-H

1.8875

9

EF/S&T TAR-21 COMP

1.2565

10

EF ARX160 ELITE

1.866

11

CA KAC LMG, VFC MP5 A/SD

1.127

12

LCT AK-47/74/M

1.2155

13

A&K MASADA/ACR

1.7265

14

KA CZ 805 BREN, CG M249 FEATHERWEIGHT, A&K M60

1.769

15

EF/ARES G36KV/CV, JG G36

1.434

16

EF/S&T G36C

1.421

17

CA AUG

1.384

18

G&G MP5 A/SD

1.175

19

VFC/ECHO1 XCR

1.6065

20

CA G36, CYMA SR-25

1.406

21 Elite Force/CYMA MP5K, CA SA58 1.303

Please note this is not an exhaustive list, take the measurements into account when looking for a model not present in this list.

 

Familias relacionadas

HPA HPA Nozzles

Fecha de lanzamiento

Lunes, 12 Febrero 2024