Prometheus EG Barrel 155mm for KRYTAC PDW AEG

The Prometheus EG 155mm for KRYTAC PDW AEG is a very high quality tight bore barrel crafted from stainless steel. Though expensive you know you'll be getting a long lasting barrel made to very high tolerances. Due to the strength and highly polished finish of the steel it is very resistant to scratches and dirt. Also its nearly impossible to bend this barrel by accident, in guns with front ends with movement a brass barrel or worse an aluminium barrel will bend as you bend the outer barrel of a gun. These are all facts which are often overlooked as players focus solely on price or how tight the bore is.

Speaking of tighter bore, this is a 6.03 bore which will increase the FPS of your gun. Some players use this as one of many tuning tools for a quick 5 - 10 FPS bump for there gun.

The hop window isn't as wide as some, so if your looking to install one of the more modern style hop numbers like a firefly or prometheus flat number system you may want to consider filling this window wider before installation, or after installation check to see if all the hop rubber is coming down correctly into the barrel. Over all a fantastic quality product.

*** Tech Note - There are Loads of different barrel lengths, its always best to remove and measure your existing barrel, you will have to do it anyway to fit the new one. Then you can work out for your self how long it needs to be, as its your personal preference should you want to run the barrel further than the manufacturer intended which on many guns is preferable all the way to the end. ***

*** Tech Note - Before installing any NEW barrel please clean it using a cleaning rod, and silicon oil ***